Bread & Fred, Switch NSP, XCI ROM Download

Support Us with a small donation to keep the service active longer. Donate Now

Categories: Multiplayer, Party, Platformer, Switch

Grab your best bud for help in this new co-op challenge to help two adorable penguins, Bread and Fred, reach the top of the snowy summit.

Bread & Fred is a challenging co-op platformer from Apogee where two players must cooperate to jump and climb to the top of a snowy mountain. Play as both Bread and Fred in their exasperating and sometimes maddening climb that requires precision with every jump. Each time you land you’ll be closer to the peak and one step closer to mastering the platforming, but your fall down the mountain will be even farther.

Penguin Mechanics:

– Swing to reach distant platforms!

Bread and Fred are attached to each other. That means you don’t only fall together, but you can make good use of momentum to swing and propel each other beyond what any single penguin could have ever jumped. Make sure one of you anchors down to the ground or you’ll both fall!

– Hold on to walls as long as you can!

The penguins’ little hands aren’t very good, but you can hang on a wall with your partner for a few seconds to swing them around and overcome the next obstacle. Be careful though. These penguins are chubby so you can’t hold on long. Act fast!

– Single-player mode!

Can’t find your penguin buddy? Strap your rope to Jeff (a rock!) and use it instead! The climb will all be up to you and your skill, but that also means you have no one to blame when you fall…

Legends say that with these skills, a few penguin heroes have managed to reach the top. Will you be one of them?

Each fall will hurt, but try to learn and laugh through it. Think carefully about each jump and master the penguin skills to reach the summit.

For the craziest climbers, Bread & Fred includes a speedrun mode so you can compete and be crowned the best penguins on the planet.

The mountain awaits you. Complete your mission. Cooperate with each other and you will be able to go far up the mountain. Just try not to fall (too much). Good luck!!

Bread & Fred 3

Bread & Fred 4

Bread & Fred 5

Download Link

Base Game

Game Game (backup link)

Update

DLC

Other

Note: Kindly report any broken, dead, incorrect, or missing links in the comment section, we will do our best to fix it within 48 hours. Your feedback is highly appreciated!

Release date	May 23, 2024
No. of players	Single System (1-2) Online (1-2)
Game file size	412 MB
Supported languages	English, French, German, Italian, Japanese, Korean, Portuguese, Simplified Chinese, Spanish, Traditional Chinese
Format	nsp

Reviews

There are no reviews yet.

Be the first to review “Bread & Fred, Switch NSP, XCI ROM Download” Cancel reply

●How to play NSP/XCI games on my switch?

To play NSP/XCI games on your switch you will need a Hacked/Modded Switch console, for new users we’ve gathered a guide, please check here: Ultimate NOOB Hacking Guide

●How can I play Switch games on my computer?

Please download the Nintendo Switch Emulator which is Yuzu or Ryujinx.

●The downloaded file is in a format that emulators cannot recognize.What should I do?

When encountering this issue, please use a format conversion tool: Switch Army Knife (SAK)

●Where can I find Prod Keys and Firmware for emulators?

You can find Prod Keys and Firmware here.

●What is the password for the zip?

spacestation99.com

ByAlvRo

●How to Install NSP Update or DLC of Any Game on Yuzu and Ryujinx Emulator?

How to Install NSP Update or DLC on Yuzu

Installing NSP updates on Yuzu emulator is a simple process. Here are the steps to install NSP updates on Yuzu emulator:

Step 1: Open Yuzu Emulator and click on File and then click on “Install Files to NAND…“

Step 2: Navigate to the location where you have saved the NSP update or DLC file.

Step 3: Now, you will see a popup window asking to confirm, click install. The installation process will start, and once completed, you will see the update installed in the emulator.

That’s all it takes! As shown in the image below, the game has been updated. You can now enjoy the game’s latest version, with improved performance and exciting new features.

How to Install NSP Update or DLC on Ryujinx

To install NSP updates on Ryujinx emulator, simply follow these steps:

Step 1: Open the Ryujinx emulator and right-click on the game you want to update. Next, select “Manage Title Updates” to install the NSP Update or “Manage DLC” to install DLC. In this example, we will update “The Legend of Zelda: Tears of the Kingdom. to v1.1.0“

Step 2: A “Ryujinx – Title Update Manager” popup window will appear. Click on “Add.”

Step 3: Navigate to the location where you have saved the NSP update or DLC file, select it, and then click “Save.”

That’s all there is to it! As shown in the image below, the game has been updated. Now you can enjoy the updated version of the game with better performance and new features on Ryujinx emulator.

●How to Easily Bypass 1fichier Waiting Time When Downloading Files?

There are methods to bypass the waiting time on 1fichier and gain seamless file access. In this guide, I will present three effective working methods that can help you overcome these restrictions and maximize your productivity when using the 1fichier platform.

3 Methods to Bypass 1fichier Waiting Time When Downloading Files

Method 1: Using Aeroplane Mode

1fichier tracks your IP address to enforce waiting times after downloading a file. However, if you’re using a mobile device with a SIM network, you can easily bypass the waiting time on 1fichier by following these steps:

Step 1: Enable Airplane Mode on your mobile device. Wait for a few seconds, and then disable Airplane Mode.

Step 2: This action will assign you a new IP address, allowing you to bypass the waiting time on 1fichier.

Step 3: Now that you have a new IP address, simply refresh the 1fichier downloading page, and the waiting time will be gone.

However, one limitation of the previous method is the inability to download large files due to data limits and limited storage capacity on mobile devices. Therefore, let’s move on to the next method, where I will demonstrate how to bypass the waiting time on 1fichier using Wi-Fi or Ethernet on your PC.

Method 2: Enable/Disable Network Connection

As mentioned before, 1fichier tracks your IP address to enforce waiting times after downloading a file. To bypass this waiting time, you can change your IP address on your PC using a Wi-Fi or Ethernet connection, similar to how you do it on your mobile phone by enabling Airplane mode. Follow these simple steps to proceed:

Step 1: Open the Control Panel and go to Network and Internet > Network and Sharing Center. Then, click on “Change adapter settings” located on the left-hand side.

Step 2: Right-click on your network connection, whether it is Wi-Fi or Ethernet, and select “Disable” (in my case, it is Wi-Fi).

Step 3: Finally, right-click on the network connection once more and choose “Enable” to restore the connection.

Step 4: Similar to Method 1, this action will also assign you a new IP address, enabling you to bypass the waiting time on 1fichier.

Note: Alternatively, you can power off and on your Wi-Fi router, which will achieve the same result of assigning you a new IP address. However, please note that this method may not be effective for everyone if your ISP has assigned a non-changeable IP address.

Step 5: Now that you have a new IP address, simply refresh the 1fichier downloading page, and the waiting time will be gone.

Method 3: Using a VPN

If the previously mentioned methods do not work for you, this last method is guaranteed to be effective. As you may already know, you can change your IP address using a VPN, which is exactly what we need to bypass the waiting time on 1fichier.

Now, many of you might think that using a VPN cannot bypass the waiting time on 1fichier, and it’s true that most VPNs do not work for this purpose. However, in this method, I will demonstrate how you can easily bypass the waiting time on 1fichier using a VPN.

Step 1: Download the cracked version of Betternet VPN by clicking the button below. This version offers unlimited access and seamlessly works with 1fichier.

Step 2: Extract the “Betternet.VPN.5.3.0.433.zip” file, install Betternet VPN on your PC by running the Setup.msi, and launch it.

Step 3: Connect to any location you want, or you can simply select the “Best location“.

Step 4: Now that you have a new IP address, simply refresh the 1fichier downloading page, and the waiting time will be gone.

Step 5: Click on the “Download” button to initiate the file download.

Step 6: Now you’ll see a “Click here to download the file” button, but don’t click it yet.

Step 7: Disconnect the VPN on this page, then click the “Click here to download the file” button.

Step 8: By doing this, your download speed won’t be affected by the VPN.

Tip: For optimal download speed, consider using a reliable download manager such as IDM (Internet Download Manager). I personally rely on IDM for all my downloads.

Step 9: After disconnecting the VPN, click the “Click here to download the file” button to proceed with the download. If you are using IDM, right-click on the button and select “Download with IDM” to initiate the download using IDM.

●How to Fix Expired Link Issue on 1fichier?

Some users may encounter an issue on 1fichier where they see the message “EXPIRED LINK/LIEN EXPIRE” along with the statement:

This problem can occur if 1fichier is blocked in your country or by your Internet Service Provider (ISP), or it could simply be a bug.

Solution: There is a simple solution to this issue. You can use a VPN (Virtual Private Network) by following Method 3 mentioned in the post above.

Using a VPN allows you to bypass any restrictions or blocks imposed by your country or ISP. It creates a secure connection to a server in a different location, enabling you to access 1fichier and resolve the expired link problem.